Table of Contents
Advertisement
Router L2TP Commands
challenge
Syntax
challenge challenge-mode
no challenge
config>router>l2tp>group>tunnel
Context
This command configures the use of challenge-response authentication.
Description
The no form of the command removes the parameter from the configuration and indicates that the
value on group level will be taken.
no challenge
Default
challenge-mode — Specifies when challenge-response is to be used for the authentication of the
Parameters
hello-interval
Syntax
hello-interval hello-interval
hello-interval infinite
no hello-interval
config>router>l2tp>group>tunnel
Context
This command configures the number of seconds between sending Hellos for a L2TP tunnel. The no
Description
form removes the parameter from the configuration and indicates that the value on group level will be
taken.
hello-interval — Specifies the time interval, in seconds, between two consecutive tunnel Hello
Parameters
infinite — Specifies that no hello messages are sent.
idle-timeout
Syntax
idle-timeout idle-timeout
idle-timeout infinite
no idle-timeout
config>router>l2tp>group>tunnel
Context
This command configures the idle timeout to wait before being disconnect. The no form indicates
Description
that the parameter will be removed from the configuration and that the value specified on group level
will be taken.
Page 132
tunnel.
always — Always allows the use of challenge-response authentication.
Values
never — Never allows the use of challenge-response authentication.
messages.
60 — 3600
Values
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
