Table of Contents
Advertisement
version — Specifies the version of the flow data collector.
aggregation
[no] aggregation
Syntax
config>cflowd>collector
Context
This command configures the type of aggregation scheme to be exported.
Description
Specifies the type of data to be aggregated and to the collector.
To configure aggregation, you must decide which type of aggregation scheme to configure:
autonomous system, destination prefix, protocol port, raw, source destination, or source prefix.
This can only be configured if the collector version is configured as V8.
The no form of this command removes all aggregation types from the collector configuration.
Default
no aggregation
as-matrix
[no] as-matrix
Syntax
config>cflowd>collector>aggregation
Context
This command specifies that the aggregation data should be based on autonomous system (AS)
Description
information. An AS matrix contains packet and byte counters for traffic from either source-
destination autonomous systems or last-peer to next-peer autonomous systems.
The no form of this command removes this type of aggregation from the collector configuration.
no as-matrix
Default
destination-prefix
[no] destination-prefix
Syntax
config>cflowd>collector>aggregation
Context
This command specifies that the aggregation data is based on destination prefix information.
Description
The no form removes this type of aggregation from the collector configuration.
none
Default
7450 ESS OS Router Configuration Guide
Netflow v5, v8, v9, v10 (IPFIX) format
Values
5
Default
Cflowd
Page 557
Advertisement
Table of Contents
