Table of Contents
Advertisement
idle-timeout — Specifies the idle timeout, in seconds.
Parameters
infinite — Specifies that the tunnel will not be closed when idle.
peer
Syntax
peer ip-address
no peer
config>router>l2tp>group>tunnel
Context
This command configures the peer address.
Description
The no form of the command removes the IP address from the tunnel configuration.
no peer
Default
ip-address — Sets the LNS IP address for the tunnel.
Parameters
preference
Syntax
preference preference
no preference
config>router>l2tp>group>tunnel
Context
This command configures a preference number that indicates the relative preference assigned to a
Description
tunnel when using a weighted session assignment.
The no form of the command removes the preference value from the tunnel configuration.
no preference
Default
preference — Specifies the tunnel preference number with its group. The value 0 corresponds to the
Parameters
remote-name
Syntax
remote-name host-name
no remote-name
config>router>l2tp>group>tunnel
Context
This command configures a string to be compared to the host name used by the tunnel peer during the
Description
authentication phase of tunnel establishment.
host-name — Specifies a remote host name for the tunnel up to 64 characters in length.
Parameters
7450 ESS OS Router Configuration Guide
0 — 3600
Values
highest preference.
0 — 16777215
Values
IP Router Configuration
Page 133
Advertisement
Table of Contents
