Alcatel-Lucent 7450 ESS Series Configuration Manual page 235

Sample Output
show router <router-instance> tms routes
-------------------------------------------
*A:Dut-C# show router 1 tms routes
===============================================================================
TMS Routes (IPv4)
===============================================================================
Status
-------------------------------------------------------------------------------
Active
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
-------------------------------------------------------------------------------
No. of Routes: 10
===============================================================================
*A:Dut-C# show router 1 tms routes
===============================================================================
TMS Routes (IPv4)
===============================================================================
Status
-------------------------------------------------------------------------------
Active
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================
tunnel-table
tunnel-table [ip-address[/mask]] [protocol protocol | sdp sdp-id] [summary]
Syntax
show>router
Context
This command displays tunnel table information. Note that auto-bind GRE tunnels are not displayed in
Description
show command output. GRE tunnels are not the same as SDP tunnels that use the GRE encapsulation
type. When the auto-bind command is used when configuring a VPRN service, it means the MP-BGP
NH resolution is refering to the core routing instance for IP reachability. For a VPRN service this object
specifies the lookup to be used by the routing instance if no SDP to the destination exists.
Parameters ip-address[/mask] — Displays the specified tunnel table's destination IP address and mask.
protocol protocol — Dislays LDP protocol information.
sdp sdp-id — Displays information pertaining to the specified SDP.
summary — Displays summary tunnel table information.
7450 ESS OS Router Configuration Guide
Network
100.0.0.1/32
101.0.0.1/32
102.0.0.1/32
103.0.0.1/32
104.0.0.1/32
105.0.0.1/32
106.0.0.1/32
107.0.0.1/32
108.0.0.1/32
109.0.0.1/32
Network
100.0.0.1/32
IP Router Configuration
Next Hop[Interface Name]
mda-2-1
mda-2-1
mda-2-1
mda-2-1
mda-2-1
mda-2-1
mda-2-1
mda-2-1
mda-2-1
mda-2-1
Next Hop[Interface Name]
mda-2-1
Page 235