Table of Contents
Advertisement
static-label
Syntax
static-label max-lsp-labels number static-svc-labels number
no static-label
config>router>mpls-labels
Context
This command enables the range of MPLS static label values reserved for LSPs and for VCs
Description
(pseudowires) to be configured. For LSPs, these ranges only apply to static MPLS-TP paths
configured under config>router>mpls>lsp.
no static-label
Default
max-lsp-labels number — The number of static label values that are reserved for use by statically
Parameters
static-svc-labels number — The number of static label values that are reserved for use by statically
multicast-info
Syntax
multicast-info-policy policy-name
no multicast-info-policy
configure>router
Context
This command configures multicast information policy.
Description
policy-name — Specifies the policy name.
Parameters
network-domains
Syntax
network-domains
config>router
Context
7450 ESS OS Router Configuration Guide
configured LSPs. THe range is configured as follows: The minimum value of label is always 32.
The maximum value in the range is then 32 + number. The allowed values of number are as
follows for max-lsp-labels:
0 — 131071 for chassis mode C (128k)
Values
0 — 261143 for chassis mode D (256k)
Values
992
Default
configured VCs (pseudowires). The range is configured as follows: The minimum value of static
VC label is always [32 + max-lsp-labels + 1]. The maximum VC label value in the range is then
[32 + max-lsp-labels + 1+ number]. The allowed values of number are as follows for static-svc-
labels:
0 — 131071 for chassis mode C (128k)
Values
0 — 261143 for chassis mode D (256k)
Values
16384
Default
32 chars max
Values
IP Router Configuration
Page 103
Advertisement
Table of Contents
