Table of Contents
Advertisement
IP (v4/v6) Filter Entry Commands
filter-sample
[no] filter-sample
Syntax
config>filter>ip-filter>entry
Context
This command specifies that traffic matching the associated IP filter entry is sampled if the IP
Description
interface is set to cflowd acl.
If the cflowd is either not enabled or set to cflowd interface mode, this command is ignored.
The no form removes this command for the system configuration, disallowing the sampling of
packets if the ingress interface is in cflowd acl mode.
Default
no filter-sample
interface-disable-sample
[no] interface-disable-sample
Syntax
config>filter>ip-filter>entry
Context
This command specifies that traffic matching the associated IP filter entry is not sampled if the IP
Description
interface is set to cflowd interface mode. This allows the option to not sample specific types of
traffic when interface sampling is enabled.
If the cflowd is either not enabled or set to cflowd acl mode, this command is ignored.
The no form of this command enables sampling.
no interface-disable-sample
Default
match
match [protocol protocol-id]
Syntax
no match
config>filter>ip-filter>entry
Context
This command enables the context to enter match criteria for the filter entry. When the match criteria
Description
have been satisfied the action associated with the match criteria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
protocol — The protocol keyword configures an IP protocol to be used as an IP filter match
Parameters
Page 458
criterion. The protocol type such as TCP or UDP is identified by its respective protocol number.
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
