Table of Contents
Advertisement
type entry-type — specifies type of filter entry to display, values:
embedded [failed] — Shows all embeddings, optionally shows failed embedding only, if filter-id is
Show Filter (no filter-id specified) — The following table describes the command output for the
Output
command when no filter ID is specified.
Sample Output
A:ALA-49# show filter ip
===============================================================================
IP Filters
===============================================================================
Filter-Id Scope
-------------------------------------------------------------------------------
1
3
6
10
11
-------------------------------------------------------------------------------
Num IP filters: 5
===============================================================================
A:ALA-49#
*A:Dut-C>config>filter# show filter ip
7450 ESS OS Router Configuration Guide
Values
not specified shows all embedded filters.
Label
Filter Id
Scope
Applied
Description
In
From
Priority
Inserted
Applied Description
Template Yes
Template Yes
Template Yes
Template No
Template No
The IP filter ID
The filter policy is of type template.
Template —
The filter policy is of type exclusive.
Exclusive —
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The IP filter policy description.
Shows embedding filter index
Shows embedded filters included
Shows priority of embedded filter
Shows embedded/total number of entries from embedded filter
Status:
OK—embedding operation successful, if any entries are overwritten
this will also be indicated.
Failed—embedding failed, the reason is displayed (out of resources).
Filter Policies
Description
Page 495
Advertisement
Table of Contents
