Table of Contents
Advertisement
autonomous-system-type
autonomous-system-type {origin | peer}
Syntax
no autonomous-system-type
config>cflowd>collector
Context
This command defines whether the autonomous system (AS) information included in the flow data is
Description
based on the originating AS or external peer AS of the routes.
This option is only allowed if the collector is configured as Version 5 or Version 8.
The no form of this command resets the AS type to the default value.
Default
autonomous-system-type origin
origin — Specifies that the AS information included in the flow data is based on the originating AS.
Parameters
peer — Specifies that the AS information included in the flow data is based on the peer AS.
description
Syntax
description description-string
no description
config>cflowd>collector
Context
This command creates a text description stored in the configuration file for a configuration context.
Description
The no form of this command removes the description string from the context.
No description is associated with the configuration context.
Default
description-string — The description character string. Allowed values are any string up to 80 charac-
Parameters
shutdown
[no] shutdown
Syntax
config>cflowd
Context
config>cflowd>collector
This command administratively disables an entity. When disabled, an entity does not change, reset, or
Description
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
The no form of this command administratively enables an entity.
7450 ESS OS Router Configuration Guide
ters long composed of printable, 7-bit ASCII characters. If the string contains special characters
(#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Cflowd
Page 559
Advertisement
Table of Contents
