Table of Contents
Advertisement
Router Global Commands
receive-interval
Syntax
receive-interval receive-interval
no receive-interval
config>router>bfd>bfd-template
Context
This command specifies the receive timer used for BFD packets. If the template is used for a BFD
Description
session on an MPLS-TP LSP, then this timer is used for CC packets.
no receive-interval
Default
receive-interval — Specifies the receive interval. Note that the minimum interval that can be
Parameters
cv-tx
Syntax
cv-tx transmit-interval
no cv-tx
config>router>bfd>bfd-template
Context
This command specifies the transmit interval used by BFD packets used for MPLS-TP proactive CV.
Description
no cv-tx
Default
transmit-interval — Specifies the transmit interval. This parameter is only used if a BFD session is
Parameters
echo-receive
Syntax
echo-receive echo-interval
no echo-receive
config>router>bfd>bfd-template
Context
This command sets the minimum echo receive interval, in milliseconds, for a session. This is not
Description
used by a BFD session for MPLS-TP.
no echo-receive
Default
echo-interval — Specifies the echo receive interval.
Parameters
Page 108
configured is hardware dependent.
10 ms — 100,000 ms in 1 ms intervals
Values
10 ms for CPM3 or higher; 1 second for other hardware
Default
enabled with CV on an MPLS-TP LSP.
1 sec to 30 sec in 1 second increments
Values
1 second
Default
100 ms — 100,000 ms in 1 ms increments
Values
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
