Table of Contents
Advertisement
no idle-timeout
config>router>l2tp>group
Context
This command configures the period of time that an established tunnel with no active sessions will
Description
persist before being disconnected.
Enter the no form of the command to maintain a persistent tunnel.
The no form of the command removes the idle timeout from the configuration.
no idle-timeout
Default
idle-timeout — Specifies the idle timeout value, in seconds until the group is removed.
Parameters
lns-group
Syntax
lns-group lns-group-id
no lns-group
config>router>l2tp>group
Context
This command configures the ISA LNS group.
Description
lns-group-id — Specifies the LNS group ID.
Parameters
load-balance-method
load-balance-method {per-session|per-tunnel}
Syntax
no load-balance-method
config>router>l2tp>group
Context
config>router>l2tp>group>tunnel
This command describes how new sessions are assigned to an L2TP ISA MDA.
Description
per-session — Specifies that the lowest granularity for load-balancing is a session; each session can
Parameters
per-tunnel — Specifies that the lowest granularity for load-balancing is a tunnel; all sessions
7450 ESS OS Router Configuration Guide
no idle-timeout
Default
0 — 3600
Values
1 — 4
Values
be assigned to a different
ISA MDA.
associated with the same tunnel are assigned to the same ISA MDA; this may be useful or
required in certain cases, for example:
•
MLPPP with multiple links per bundle;
•
HPol intermediate destination arbiters where the intermediate destination is an L2TP tunnel.
IP Router Configuration
Page 125
Advertisement
Table of Contents
