Table of Contents
Advertisement
link-local-address
link-local-address ipv6-address [preferred]
Syntax
no link-local-address
config>router>if>ipv6
Context
This command configures the link local address.
Description
local-proxy-nd
[no] local-proxy-nd
Syntax
config>router>if>ipv6
Context
This command enables local proxy neighbor discovery on the interface.
Description
The no form of the command disables local proxy neighbor discovery.
proxy-nd-policy
proxy-nd-policy policy-name [policy-name...(up to 5 max)]
Syntax
no proxy-nd-policy
config>router>if>ipv6
Context
This command configure a proxy neighbor discovery policy for the interface.
Description
policy-name — The neighbor discovery policy name. Allowed values are any string up to 32
Parameters
neighbor
neighbor [
Syntax
no neighbor [
config>router>if>ipv6
Context
This command configures an IPv6-to-MAC address mapping on the interface. Use this command if a
Description
directly attached IPv6 node does not support ICMPv6 neighbor discovery, or for some reason, a static
address must be used. This command can only be used on Ethernet media.
The ipv6-address must be on the subnet that was configured from the IPv6 address command or a
link-local address.
7450 ESS OS Router Configuration Guide
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes. The
specified policy name(s) must already be defined.
ipv6-address] [mac-address]
ipv6-address]
IP Router Configuration
Page 169
Advertisement
Table of Contents
