Table of Contents
Advertisement
Router Global Commands
This command opens context for defining network-domains. This command is applicable only in the
Description
base routing context.
description
[no] description string
Syntax
config>router>network-domains>network-domain
Context
This command creates a text description stored in the configuration file for a configuration context.
Description
The no form of the command removes the description string from the context.
no description
Default
string — The description character string. Allowed values are any string up to 80 characters long
Parameters
network-domain
network-domain network-domain-name [create]
Syntax
no network-domain network-domain-name
config>router>network-domains
Context
This command creates network-domains that can be associated with individual interfaces and SDPs.
Description
network-domain "default"
Default
network-domain-name — Network domain name character string.
Parameters
router-id
Syntax
router-id ip-address
no router-id
config>router
Context
This command configures the router ID for the router instance.
Description
The router ID is used by both OSPF and BGP routing protocols in this instance of the routing table
manager. IS-IS uses the router ID value as its system ID.
When configuring a new router ID, protocols are not automatically restarted with the new router ID.
The next time a protocol is initialized, the new router ID is used. This can result in an interim period
of time when different protocols use different router IDs.
To force the new router ID to be used, issue the shutdown and no shutdown commands for each
protocol that uses the router ID, or restart the entire router.
Page 104
composed of printable, 7-bit ASCII characters. If the string contains special character (#, $,
space, etc.), the entire string must be enclosed within double quotes.
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
