Table of Contents
Advertisement
Clear Commands
interface
interface [ip-int-name | ip-addr] [icmp] [urpf-stats] [statistics]
Syntax
clear>router
Context
This command clears IP interface statistics.
Description
If no IP interface is specified either by IP interface name or IP address, the command will perform the
clear operation on all IP interfaces.
ip-int-name | ip-addr — The IP interface name or IP interface address.
Parameters
icmp — Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limiting.
urpf-stats — - Resets the statistics associated with uRPF failures.
statistics — - Resets the IP interface traffic statistics.
l2tp
Syntax
l2pt
clear>router
Context
This command enables the context to clear L2PT data.
Description
group
Syntax
group tunnel-group-name
clear>router>l2tp
Context
This command clears L2PT data.
Description
tunnel-group-name — Specifies a Layer Two Tunneling Protocol Tunnel Group name.
Parameters
tunnel
Syntax
tunnel tunnel-id
clear>router>l2tp
Context
This command clears L2PT data.
Description
tunnel-group-name — Clears L2TP tunnel statistics.
Parameters
Page 262
All IP interfaces.
Default
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
