Table of Contents
Advertisement
protocol-port
Syntax
Context
Description
Default
raw
Syntax
Context
Description
Default
source-destination-prefix
Syntax
Context
Description
Default
source-prefix
Syntax
Context
Description
Default
Page 558
[no] protocol-port
config>cflowd>collector>aggregation
This command specifies that flows be aggregated based on the IP protocol, source port number, and
destination port number.
The no form of this command removes this type of aggregation from the collector configuration.
none
[no] raw
config>cflowd>collector>aggregation
This command configures raw (unaggregated) flow data to be sent in Version 5.
The no form of this command removes this type of aggregation from the collector configuration.
none
[no] source-destination-prefix
config>cflowd>collector>aggregation
This command configures cflowd aggregation based on source and destination prefixes.
The no form of this command removes this type of aggregation from the collector configuration.
none
[no] source-prefix
config>cflowd>collector>aggregation
This command configures cflowd aggregation based on source prefix information.
The no form of this command removes this type of aggregation from the collector configuration.
none
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
