Table of Contents
Advertisement
routing-type0
routing-type0 {true|false}
Syntax
no routing-type0
config>filter>ipv6-filter>entry>match
Context
This command enables match on existence of Routing Type Extension Header type 0 in the IPv6 filter
Description
policy.
The no form of this command ignores Routing Type Extension Header type 0 presence/absence in a
packet when evaluating match criteria of a given filter policy entry.
Default
no routing-type0
true — match if a packet contains Routing Type Extension Header type 0
Parameters
false — match if a packet does not contain Routing Type Extension Header type 0
src-ip
src-ip {ip-address[/mask]} [netmask
Syntax
src-ip {ipv6-address/prefix-length | ipv6-address netmask | ipv6-prefix-list prefix-list-name}
no src-ip
config>filter>ip-filter>entry>match
Context
config>filter>ipv6-filter>entry>match
This command configures a source IP address range to be used as an IP filter match criterion.
Description
To match on the source IP address, specify the address and its associated mask, e.g. 10.1.0.0/16. The
conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the source IP address match criterion.
Default
no src-ip
ip-address — The valid IP prefix for the IP match criterion in dotted decimal notation.
Parameters
ip-prefix-list — creates a list of IPv4 prefixes for match criteria in IPv4 ACL and CPM filter
ipv6-prefix-list — creates a list of IPv6 prefixes for match criteria in IPv6 ACL and CPM filter
ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
mask — The subnet mask length expressed as a decimal integer.
7450 ESS OS Router Configuration Guide
0.0.0.0 — 255.255.255.255
Values
policies.
policies.
characters are used, the string must be enclosed within double quotes.
1 — 32
Values
|
ip-prefix-list prefix-list-name]
Filter Policies
Page 467
Advertisement
Table of Contents
