Table of Contents
Advertisement
Match List Configuration Commands
start of the range and end of the range are expressed as decimal integers.
port-list-name — A string of up to 32 characters of printable ASCII characters. If special characters
are used, the string must be enclosed within double quotes.
prefix
Syntax
prefix ipv6-prefix/prefix-length
no prefix ipv6-prefix/prefix-length
config>filter>match-list>ipv6-pfx-list
Context
This command adds an IPv6 address prefix to an existing IPv6 address prefix match list.
Description
The no form of this command deletes the specified prefix from the list.
Operational notes:
To add set of different prefixes, execute the command with all unique prefixes. The prefixes are
allowed to overlap IPv6 address space.
An IPv6 prefix addition will be blocked, if resource exhaustion is detected anywhere in the system
because of Filter Policies that use this IPv6 address prefix list.
No prefixes are in the list by default
Default
ipv6-prefix — A An IPv6 address prefix written as hexadecimal numbers separated by colons with
Parameters
prefix-length — Length of the entered IP prefix.
prefix
Syntax
prefix ip-prefix/prefix-length
no prefix ip-prefix/prefix-length
config>filter>match-list>ip-prefix-list
Context
This command adds an IPv4 address prefix to an existing IPv4 address prefix match list.
Description
The no form of this command deletes the specified prefix from the list.
Operational notes:
Page 474
1 — 65535
Values
host bits set to 0. One string of zeros can be omitted so 1010::700:0:217A is equivalent to
1010:0:0:0:0:700:0:217A
ipv6-prefix: - IPv6 address prefix
Values
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
1 — 128
Values
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
