Table of Contents
Advertisement
Router Global Commands
b. Timeout of a BFD session to a next-hop when BFD is enabled on the OSPF/IS-IS interface
When the SPF computation determines there is more than one primary next-hop for a prefix, it will
not program any LFA next-hop in RTM. Thus, the IP prefix will resolve to the multiple equal-cost
primary next-hops that provide the required protection.
The no form of this command disables the IP FRR feature on the system
no ip-fast-reroute
Default
mc-maximum-routes
mc-maximum-routes number [log-only] [threshold threshold]
Syntax
no mc-maximum-routes
config>router
Context
This command specifies the maximum number of multicast routes that can be held within a VPN
Description
routing/forwarding (VRF) context. When this limit is reached, a log and SNMP trap are sent. If the
log-only parameter is not specified and the maximum-routes value is set below the existing number
of routes in a VRF, then no new joins will be processed.
The no form of the command disables the limit of multicast routes within a VRF context. Issue the no
form of the command only when the VPRN instance is shutdown.
no mc-maximum-routes
Default
number — Specifies the maximum number of routes to be held in a VRF context.
Parameters
log-only — Specifies that if the maximum limit is reached, only log the event. log-only does not
threshold threshold — The percentage at which a warning log message and SNMP trap should be
mpls-labels
Syntax
mpls-labels
config>router
Context
This command creates a context for the configuration of glocal parameters related to MPLS labels.
Description
Page 102
1 — 2147483647
Values
disable the learning of new routes.
sent.
0 — 100
Values
10
Default
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
