Table of Contents
Advertisement
Router L2TP Commands
accept — Specifies that this system accepts any source IP address change of received L2TP control
Parameters
ignore — Specifiesthat this system ignores any source IP address change of received L2TP control
reject — Specifies that this system rejects any source IP address change of received L2TP control
receive-window-size
receive-window-size [4..1024]
Syntax
no receive-window-size
config>router>l2tp
Context
This command configures the L2TP receive window size.
Description
session-limit
Syntax
session-limit session-limit
no session-limit
config>router>l2tp
Context
This command configures the L2TP session limit of this router.
Description
session-limit — Specifies the session limit.
Parameters
group
group tunnel-group-name [create]
Syntax
no group tunnel-group-name
config>router>l2tp
Context
This command configures an L2TP tunnel group.
Description
tunnel-group-name — Specifies a name string to identify a L2TP group up to 63 characters in length.
Parameters
create — This keyword is mandatory when creating a tunnel group name. The create keyword
Page 122
messages related to a locally originated tunnel in the state waitReply and rejectsany peer address
change for other tunnels; in case the new peer IPaddress is accepted, it is learned and used as
destination addressin subsequent L2TP messages.
messages, does not learn anynew peer IP address and does not change the destination address
insubsequent L2TP messages.
messages and drops those messages.
1..131071
Values
requirement can be enabled/disabled in the environment>create context.
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
