Alcatel-Lucent 7450 ESS Series Configuration Manual page 197

Os configuration guide
Hide thumbs Also See for 7450 ESS Series:
Table of Contents

Advertisement

interface
interface [{[ip-address | ip-int-name] [statistics] [detail] [family]} | [summary] | [exclude-
Syntax
services]
interface family [detail]]
show>router
Context
This command displays the router IP interface table sorted by interface index.
Description
ip-address — Only displays the interface information associated with the specified IP address.
Parameters
ip-int-name — Only displays the interface information associated with the specified IP interface name.
detail — Displays detailed IP interface information.
statistics — Displays packet statistics for an interface on the router.
summary — Displays summary IP interface information for the router.
exclude-services — Displays IP interface information, excluding IP interfaces configured for customer
family — Specifies the router IP interface family to display.
Standard IP Interface Output — The following table describes the standard output fields for an IP
Output
interface.
Interface-Name
Type
IP-Address
7450 ESS OS Router Configuration Guide
ipv4-address
Values
ipv6-address
services. Only core network IP interfaces are displayed.
ipv4 — Displays only those peers that have the IPv4 family enabled.
Values
ipv6 — Displays the peers that are IPv6-capable.
Values
Label
The IP interface name.
n/a — No IP address has been assigned to the IP interface, so the IP
address type is not applicable.
Pri — The IP address for the IP interface is the Primary address on
the IP interface.
Sec — The IP address for the IP interface is a secondary address on
the IP interface.
The IP address and subnet mask length of the IP interface.
n/a
a.b.c.d (host bits must be 0)
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
Description
— Indicates no IP address has been assigned to the IP interface.
IP Router Configuration
Page 197

Advertisement

Table of Contents
loading

Table of Contents