Table of Contents
Advertisement
Last Oper Change
Global If Index
Sap ID
TOS Marker
If Type
SNTP B.cast
IES ID
QoS Policy
MAC Address
Arp Timeout
ICMP Mask Reply
Arp Populate
Host Conn Verify
LdpSyncTimer
uRPF Chk
uRPF Iv6 Chk
PTP HW Assist
Cflowd
Sample Output
B:bksim1619# show router interface "to-sim1621" detail
===============================================================================
Interface Table (Router: Base)
===============================================================================
7450 ESS OS Router Configuration Guide
Label
The last change in operational status.
The global interface index of the IP router interface.
The SAP identifier.
The TOS byte value in the logged packet.
Network — The IP interface is a network/core IP interface.
Service — The IP interface is a service IP interface.
Displays if the broadcast-client global parameter is configured.
The IES identifier.
The QoS policy ID associated with the IP interface.
The MAC address of the interface.
The ARP timeout for the interface, in seconds, which is the time an
ARP entry is maintained in the ARP cache without being refreshed.
False — The IP interface will not reply to a received ICMP mask
request.
True — The IP interface will reply to a received ICMP mask request.
Displays whether ARP is enabled or disabled.
The
host connectivity verification.
Specifies the IGP/LDP sync timer value.
Specifies whether unicast RPF (uRPF) Check is enabled on this inter-
face.
Specifies whether unicast RPF (uRPF) Check IPv6 is enabled on this
interface.
Specifies whether the PTP Hardware Assist function is enabled on this
interface.
Specifies the type of Cflowd analysis that is applied to the interface.
acl — ACL Cflowd analysis is applied to the interface.
interface — Interface cflowd analysis is applied to the interface.
none — No Cflowd analysis is applied to the interface.
IP Router Configuration
Description (Continued)
Page 201
Advertisement
Table of Contents
