Table of Contents
Advertisement
reachable-time
Syntax
reachable-time milli-seconds
no reachable-time
config>router>router-advert>if
Context
This command configures how long this router should be considered reachable by other nodes on the
Description
link after receiving a reachability confirmation.
no reachable-time
Default
milli-seconds — Specifies the length of time the router should be considered reachable.
Parameters
retransmit-time
Syntax
retransmit-timer milli-seconds
no retransmit-timer
config>router>router-advert>if
Context
This command configures the retransmission frequency of neighbor solicitation messages.
Description
no retransmit-time
Default
milli-seconds — Specifies how often the retransmission should occur.
Parameters
router-lifetime
Syntax
router-lifetime seconds
no router-lifetime
config>router>router-advert>if
Context
This command sets the router lifetime.
Description
1800
Default
seconds — The length of time, in seconds, (relative to the time the packet is sent) that the prefix is
Parameters
use-virtual-mac
[no] use-virtual-mac
Syntax
7450 ESS OS Router Configuration Guide
0 — 3600000
Values
0 — 1800000
Values
valid for route determination.
0, 4 — 9000 seconds. 0 means that the router is not a default router on this link.
Values
IP Router Configuration
Page 175
Advertisement
Table of Contents
