Router L2TP Commands
authentication
authentication {chap|pap|pref-chap}
Syntax
config>router>l2tp>group>ppp
Context
This command configures the PPP authentication protocol to negotiate.
Description
authentication-policy
Syntax
authentication-policy auth-policy-name
no authentication-policy
config>router>l2tp>group>ppp
Context
This command configures the authentication policy.
Description
auth-policy-name — Specifies the authentication policy name.
Parameters
default-group-interface
Syntax
default-group-interface ip-int-name service-id service-id
no default-group-interface
config>router>l2tp>group>ppp
Context
This command configures the default group interface.
Description
ip-int-name — Specifies the interface name.
Parameters
service-id — Specifies the service ID.
svc-name — Specifies the service name (instead of service ID).
keepalive
keepalive seconds [hold-up-multiplier multiplier]
Syntax
no keepalive
config>router>l2tp>group>ppp
Context
Page 128
32 chars max
Values
32 chars max
Values
1..2147483648
Values
64 chars max
Values
7450 ESS OS Router Configuration Guide