Alcatel-Lucent 7450 ESS Series Configuration Manual page 327

Os configuration guide
Hide thumbs Also See for 7450 ESS Series:
Table of Contents

Advertisement

interface or based on the Telnet source host address). Proper login and CLI command authentication
is still enforced.
When telnet-reply is not enabled, Telnet requests to non-owner master virtual IP addresses are
silently discarded.
Non-owner backup virtual routers never respond to Telnet requests regardless of the telnet-reply
setting.
The telnet-reply command is only available in non-owner vrrp nodal context.
By default, Telnet requests to the virtual router instance IP addresses will be silently discarded.
The no form of the command configures discarding all Telnet request messages destined to the non-
owner virtual router instance IP addresses.
no telnet-reply — Telnet requests to the virtual router instance IP addresses are discarded.
Default
traceroute-reply
[no] traceroute-reply
Syntax
config>router>if>vrrp
Context
This command is valid only if the VRRP virtual router instance associated with this entry is a non-
Description
owner.
When this command is enabled, a non-owner master can reply to traceroute requests directed to the
virtual router instance IP addresses.
A non-owner backup virtual router never responds to such traceroute requests regardless of the trace-
route-reply status.
no traceroute-reply
Default
vrrp
vrrp vrid [owner]
Syntax
no vrrp vrid
config>router>interface ip-int-name
Context
This command creates the context to configure a VRRP virtual router instance. A virtual router is
Description
defined by its virtual router identifier (VRID) and a set of IP addresses.
The optional owner keyword indicates that the owner controls the IP address of the virtual router and
is responsible for forwarding packets sent to this IP address. The owner assumes the role of the
master virtual router.
All other virtual router instances participating in this message domain must have the same vrid
configured and cannot be configured as owner. Once created, the owner keyword is optional when
entering the vrid for configuration purposes.
7450 ESS OS Router Configuration Guide
VRRP
Page 327

Advertisement

Table of Contents
loading

Table of Contents