Table of Contents
Advertisement
fp-tunnel-table
fp-tunnel-table slot-number [ip-prefix/prefix-length]
Syntax
show>router
Context
This command displays the IOM/IMM label, next-hop and outgoing interface information for BGP,
Description
LDP and RSVP tunnels used in any of the following applications:
• BGP shortcut (configure>router>bgp>igp-shortcut)
• IGP shortcut (config>router>isis[ospf]>rsvp-shortcut)
• IGP prefix resolved to an LDP LSP (config>router>ldp-shortcut)
• Static prefix shortcut
• VPRN auto-bind
• 6PE/6VPE.
slot-number — Displays information for the specified slot.
Parameters
ip-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length.
icmp6
Syntax
icmp6
show>router
Context
This command displays Internet Control Message Protocol Version 6 (ICMPv6) statistics. ICMP
Description
generates error messages (for example, ICMP destination unreachable messages) to report errors during
processing and other diagnostic functions. ICMPv6 packets can be used in the neighbor discovery
protocol and path MTU discovery.
icmp6 Output — The following table describes the show router icmp6 output fields:
Output
Total
Destination
Unreachable
7450 ESS OS Router Configuration Guide
1 — 10
Values
ipv4-prefix:
Values
ipv4-prefix-length:
x:x:x:x:x:x:x:x (eight 16-bit pieces)
prefix-length:
Label
The total number of all messages.
The number of message that did not reach the destination.
IP Router Configuration
a.b.c.d (host bits must be set to 0)
0 — 32ipv6
ipv6-prefix[/pref*:
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
1 — 128ipv6
Description
Page 193
Advertisement
Table of Contents
