Table of Contents
Advertisement
Show Commands
rtr-advertisement
rtr-advertisement [interface interface-name]
Syntax
rtr-advertisement [conflicts]
show>router
Context
This command displays router advertisement information.
Description
If no command line arguments are specified, all routes are displayed, sorted by prefix.
interface-name — Maximum 32 characters.
Parameters
Router-Advertisement Table Output — The following table describes the output fields for router-
Output
advertisement.
Rtr Advertisement
Tx/Last Sent
Nbr Solicitation
Tx
Nbr Advertisement
Tx
Rtr Advertisement
Rx
Nbr Advertisement
Rx
Max Advert Inter-
val
Managed Config
Reachable Time
Retransmit Time
Link MTU
Rtr Solicitation
Rx
Nbr Solicitation
Rx
Page 222
Label
The number of router advertisements sent and time since they were
sent.
The number of neighbor solicitations sent and time since they were
sent.
The number of neighbor advertisements sent and time since they were
sent.
The number of router advertisements received and time since they
were received.
The number of neighbor advertisements received and time since they
were received.
The maximum interval between sending router advertisement mes-
sages.
True — Indicates that DHCPv6 has been configured.
False — Indicates that DHCPv6 is not available for address config-
uration.
The time, in milliseconds, that a node assumes a neighbor is reachable
after receiving a reachability confirmation.
The time, in milliseconds, between retransmitted neighbor solicitation
messages.
The MTU number the nodes use for sending packets on the link.
The number of router solicitations received and time since they were
received.
The number of neighbor solicitations received and time since they
were received.
Description
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
