Table of Contents
Advertisement
Router Global Commands
sgt-qos
Syntax
sgt-qos
config>router
Context
This command configures DSCP/Dot1p re-marking for self-generated traffic.
Description
application
application dscp-app-name dscp {dscp-value |dscp-name}
Syntax
application dot1p-app-name dot1p dot1p-priority
no application {dscp-app-name|dot1p-app-name}
config>router>sgt-qos
Context
This command configures DSCP/Dot1p re-marking for applications.
Description
dscp-app-name — Specifies the DSCP application name.
Parameters
dscp-value — Specifies the DSCP value
dscp-name — Specifies the DSCP name.
dot1p-priority — Specifies the Dot1p priority.
dot1p-app-name — Specifies the Dot1p application name.
dscp
Syntax
dscp dscp-name fc fc-name
no dscp dscp-name
Page 106
When this option is specified, the addresses configured are exclusively used for services and
cannot be assigned to network ports.
bgp, cflowd, dhcp, dns, ftp, icmp, igmp, igmp-reporter, l2tp, ldp, mld, msdp, ndis,
Values
ntp, ospf, pim, ptp, radius, rip, rsvp, snmp, snmp-notification, srrp, ssh, syslog,
tacplus, telnet, tftp, traceroute, vrrp
0 — 63
Values
none, be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11, af12,
af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21,
cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44, cp45, cp47, cp49,
cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58, cp59, cp60, cp61, cp62, cp63
none, 0 — 7
Values
arp, isis, pppoe
Values
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
