Table of Contents
Advertisement
ACL Filter Policy Commands
The no form of the command reverts to the default.
none
Default
entry entry-id — Specifies at what place the filter entries received from RADIUS will be inserted in
Parameters
count count — Specifies the count.
sub-insert-shared-radius
Syntax
sub-insert-shared-radius start-entry entry-id count count
no sub-insert-shared-radius
config>filter>ip-filter
Context
config>filter>ipv6-filter
This command configures the insert point for shared host rules from RADIUS.
Description
entry entry-id — Identifies a filter on this system.
count count — Specifies the count.
sub-insert-wmark
Syntax
sub-insert-wmark low low-watermark high high-watermark
no sub-insert-wmark
config>filter>ip-filter
Context
config>filter>ipv6-filter
This command configures the low and high watermark percentage for inserted filter entry usage
Description
reporting.
The no form of the command reverts to the default.
none
Default
low low-watermark — Specifies the utilization of the filter ranges for filter entry insertion, at which a
Parameters
Page 452
the filter.
1 — 65535
Values
1 — 65535
Values
1 — 65535
Values
1 — 65535
Values
table full alarm will be cleared by the agent.
0 — 100
Values
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
