Alcatel-Lucent 7450 ESS Series Configuration Manual page 232

Show Commands
dscp-map
dscp-map [dscp-name]
Syntax
show>router>sgt-qos
Context
This command displays DSCP to FC mappings.
Description
dscp-name — The specific DSCP name.
Parameters
status
Syntax status
show>router
Context
This command displays the router status.
Description
Router Status Output — The following table describes the output fields for router status
Output
information.
Router
OSPF
RIP
ISIS
MPLS
RSVP
LDP
Max Routes
Total Routes
ECMP Max Routes
Page 232
be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11,
Values
af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15,
cp17, cp19, cp21, cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42,
cp43, cp44, cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58, cp59,
cp60, cp61, cp62, cp63
Label
The administrative and operational states for the router.
The administrative and operational states for the OSPF protocol.
The administrative and operational states for the RIP protocol.
The administrative and operational states for the IS-IS protocol.
The administrative and operational states for the MPLS protocol.
The administrative and operational states for the RSVP protocol.
The administrative and operational states for the LDP protocol.
The maximum number of routes configured for the system.
The total number of routes in the route table.
The number of ECMP routes configured for path sharing.
Description
7450 ESS OS Router Configuration Guide