Alcatel-Lucent 7450 ESS Series Configuration Manual page 556

cache-size
Syntax
Context
Description
Default
Parameters
collector
Syntax
Context
Description
Default
Parameters
Page 556
cache-size num-entries
no cache-size
config>cflowd
This command specifies the maximum number of active flows to maintain in the flow cache table.
The no form of this command resets the number of active entries back to the default value.
65536 (64K)
num-entries — The number of entries maintained in the cflowd cache.
1000 — 250000 (SF/CPM3
Values
1000 - 128k
collector ip-address[:port] {version [ 5 | 8 | 9 | 10]}
no collector
config>cflowd
This command defines a flow data collector for cflowd data. The IP address of the flow collector
must be specified. The UDP port number is an optional parameter. If it is not set, the default of 2055
is used for all collector versions. To connect to a IPFIX (version 10) collector using the IPFIX default
port, specify port 4739 when configuring the collector. The version must be specified. A maximum of
5 collectors can be configured.
The no form of this command removes the flow collector definition from the config and stops the
export of data to the collector. The collector needs to be shutdown to be deleted.
none
ip-address — Specifies the address of a remote Cflowd collector host to receive the exported Cflowd
data.
<ip-address[:port]> : ip-address - a.b.c.d[:port]
Values
port — Specifies the UDP port number on the remote Cflowd collector host to receive the exported
Cflowd data.
1— 65535
Values
2055
Default
(all other platforms)
x:x:x:x:x:x:x:x (IPv6)
[x:x:x:x:x:x:x:x]:port (IPv6)
x - [0..FFFF]H
7450 ESS OS Router Configuration Guide
(IPv4)