Table of Contents
Advertisement
packet-too-big
packet-too-big [number seconds]
Syntax
no packet-too-big
config>router>if>ipv6>icmp6
Context
This command configures the rate for ICMPv6 packet-too-big messages.
Description
number — Limits the number of packet-too-big messages issued per the time frame specifed in the
Parameters
seconds — Determines the time frame, in seconds, that is used to limit the number of packet-too-big
param-problem
param-problem [number seconds]
Syntax
no param-problem
config>router>if>ipv6>icmp6
Context
This command configures the rate for ICMPv6 param-problem messages.
Description
number — Limits the number of param-problem messages issued per the time frame specifed in the
Parameters
seconds — Determines the time frame, in seconds, that is used to limit the number of param-problem
redirects
redirects [number seconds]
Syntax
no redirects
config>router>if>ipv6>icmp6
Context
This command configures the rate for ICMPv6 redirect messages. When configured, ICMPv6
Description
redirects are generated when routes are not optimal on the router and another router on the same
subnetwork has a better route to alert that node that a better route is available.
The no form of the command disables ICMPv6 redirects.
100 10 (when IPv6 is enabled on the interface)
Default
7450 ESS OS Router Configuration Guide
seconds parameter.
10 — 1000
Values
messages issued per time frame.
1 — 60
Values
seconds parameter.
10 — 1000
Values
messages issued per time frame.
1 — 60
Values
IP Router Configuration
Page 167
Advertisement
Table of Contents
