Table of Contents
Advertisement
Router Interface Commands
number — Limits the number of redirects issued per the time frame specifed in seconds parameter.
Parameters
seconds — Determines the time frame, in seconds, that is used to limit the number of redirects issued
time-exceeded
time-exceeded [number seconds]
Syntax
no time-exceeded
config>router>if>ipv6>icmp6
Context
This command configures rate for ICMPv6 time-exceeded messages.
Description
number — Limits the number of time-exceeded messages issued per the time frame specifed in
Parameters
seconds — Determines the time frame, in seconds, that is used to limit the number of time-exceeded
unreachables
unreachables [number seconds]
Syntax
no unreachables
config>router>if>ipv6>icmp6
Context
This command configures the rate for ICMPv6 unreachable messages. When enabled, ICMPv6 host
Description
and network unreachable messages are generated by this interface.
The no form of the command disables the generation of ICMPv6 host and network unreachable
messages by this interface.
100 10 (when IPv6 is enabled on the interface)
Default
number — Determines the number destination unreachable ICMPv6 messages to issue in the time
Parameters
seconds — Sets the time frame, in seconds, to limit the number of destination unreachable ICMPv6
Page 168
10 — 1000
Values
per time frame.
1 — 60
Values
seconds parameter.
10 — 1000
Values
messages issued per time frame.
1 — 60
Values
frame specified in seconds parameter.
10 — 1000
Values
messages issued per time frame.
1 — 60
Values
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
