Table of Contents
Advertisement
interface that has no physical port specified will be accepted, but will have no effect as long as a
corresponding port, or LAG, is defined..
Single interfaces can be associated with multiple network-domains.
per default "default" network domain is assigned
Default
ntp-broadcast
[no] ntp-broadcast
Syntax
config>router>interface
Context
This command enables SNTP broadcasts received on the IP interface. This parameter is only valid
Description
when the SNTP broadcast-client global parameter is configured.
The no form of the command disables SNTP broadcast received on the IP interface.
no ntp-broadcast
Default
port
Syntax
port port-name
no port
config>router>interface
Context
This command creates an association with a logical IP interface and a physical port.
Description
An interface can also be associated with the system (loopback address).
The command returns an error if the interface is already associated with another port or the system. In
this case, the association must be deleted before the command is re-attempted. The port-id can be in
one of the following forms:
The no form of the command deletes the association with the port. The no form of this command can
only be performed when the interface is administratively down.
No port is associated with the IP interface.
Default
port-name — The physical port identifier to associate with the IP interface.
Parameters
7450 ESS OS Router Configuration Guide
•
Ethernet interfaces
If the card in the slot has MDAs, port-id is in the slot_number/MDA_number/port_number
format; for example, 1/1/3 specifies port 3 of the MDA installed in MDA slot 1 on the card
installed in chassis slot 1.
•
SONET/SDH interfaces
When the port-id represents a POS interface, the port-id must include the channel-id. The POS
interface must be configured as a network port.
port-id
Values
slot/mda/port[.channel]
ccag-id
IP Router Configuration
ccag-id.path-id[cc-type]
Page 149
Advertisement
Table of Contents
