Alcatel-Lucent 7450 ESS Series Configuration Manual page 127

max-retries-not-estab
Syntax max-retries-not-estab max-retries
no max-retries-not-estab
config>router>l2tp>group
Context
config>router>l2tp>group>tunnel
This command configures the number of retries allowed for this L2TP tunnel while it is not
Description
established, before its control connection goes down.
The no form of the command removes the value from the configuration.
no max-retries-not-estab
Default
max-retries — Specifies the maximum number of retries for non-established tunnels.
Parameters
password
password password [hash | hash2]
Syntax
no password
config>router>l2tp>group
Context
config>router>l2tp>group>tunnel
This command configures the password between L2TP LAC and LNS
Description
The no form of the command removes the password.
no password
Default
password — Configures the password used for challenge/response calculation and AVP hiding. The
Parameters
hash — Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is
ppp
Syntax ppp
config>router>l2tp>group
Context
This command configures PPP for the L2TP tunnel group.
Description
7450 ESS OS Router Configuration Guide
no max-retries-not-estab
Default
2 — 7
Values
maximum length can be up to 20 characters if unhashed, 32 characters if hashed, 54 characters if
the hash2 keyword is specified.
is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
not used, the less encrypted hash form is assumed.
no password
Default
IP Router Configuration
Page 127