Table of Contents
Advertisement
Total Discards
===============================================================================
*A:ALA-A#
policy
policy [vrrp-policy-id [event event-type specific-qualifier]]
Syntax
show>vrrp
Context
This command displays VRRP priority control policy information.
Description
If no command line options are specified, a summary of the VRRP priority control event policies dis-
plays.
vrrp-policy-id — Displays information on the specified priority control policy ID.
Parameters
event event-type — Displays information on the specified VRRP priority control event within the
specific-qualifier — Display information about the specified qualifier.
VRRP Policy Output — The following table describes the VRRP policy command output fields.
Output
7450 ESS OS Router Configuration Guide
: 0
All VRRP policies IDs
Default
1 — 9999
Values
policy ID.
All event types and qualifiers
Default
Values
port-down port-id
lag-port-down lag-id
host-unreachable host-ip-addr
route-unknown route-prefix/mask
mc-ipsec-non-forwarding
port-id, lag-id, host-ip-addr, route-prefix/mask, tunnel-group-id
Values
Label
Policy Id
Current Priority & Effects
Current Explicit
The VRRP priority control policy associated with the VRRP virtual
router instance.
A value of 0 indicates that no control policy is associated with the vir-
tual router instance.
When multiple explicitly defined events associated with the priority
control policy happen simultaneously, the lowest value of all the cur-
rent explicit priorities will be used as the in-use priority for the virtual
router.
Description
VRRP
Page 355
Advertisement
Table of Contents
