Alcatel-Lucent 7450 ESS Series Configuration Manual page 228

Os configuration guide
Hide thumbs Also See for 7450 ESS Series:
Table of Contents

Advertisement

Show Commands
A:ALA-A# show router static-arp mac 00:00:5a:40:00:01
===============================================================================
ARP Table
===============================================================================
IP Address
-------------------------------------------------------------------------------
10.200.0.253
===============================================================================
A:ALA-A#
static-route
static-route [family] [[ip-prefix /mask] | [preference preference] | [next-hop ip-address] | tag
Syntax
tag]
show>router
Context
This command displays the static entries in the routing table. If no options are present, all static routes
Description
are displayed sorted by prefix.
family — Specify the type of routing information to be distributed by this peer group.
Parameters
ip-prefix /mask — Displays static routes only matching the specified ip-prefix and mask.
preference preference — Only displays static routes with the specified route preference.
next-hop ip-address — Only displays static routes with the specified next hop IP address.
tag tag — Displays the tag used to add a 32-bit integer tag to the static route. The tag is used in route
Static Route Output — The following table describes the output fields for the static route table.
Output
IP Addr/mask
Pref
Metric
Page 228
MAC Address
00:00:5a:40:00:01 00:00:00 Sta to-ser1
ipv4 — Displays only those BGP peers that have the IPv4 family enabled and not
Values
those capable of exchanging IP-VPN routes.
mcast-ipv4 — Displays the BGP peers that are IPv4 multicast capable.
ipv4-prefix:
Values
ipv4-prefix-length: 0 — 32
0 — 65535
Values
ipv4-address:
Values
policies to control distribution of the route into other protocols.
1 — 4294967295
Values
Label
The static route destination address and mask.
The route preference value for the static route.
The route metric value for the static route.
Age
Type Interface
a.b.c.d (host bits must be 0)
a.b.c.d (host bits must be 0)
Description
7450 ESS OS Router Configuration Guide

Advertisement

Table of Contents
loading

Table of Contents