Required Tools; Obtaining The Chassis Serial Number - Oracle Database Appliance X6-2-HA Manual

Preparing to Service
Follow all cautions, warnings, and instructions marked on the equipment and described
■
in Important Safety Information for Oracle's Hardware Systems and Oracle Database
Appliance Safety and Compliance Guide.
Ensure that the voltage and frequency of your power source match the voltage and
■
frequency inscribed on the equipment's electrical rating label.
Follow the electrostatic discharge safety practices as described in this chapter.
■

Required Tools

Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
Oracle Database Appliance can be serviced with the following tools:
Antistatic wrist strap
■
Antistatic mat
■
No. 2 10-inch Phillips screwdriver (magnetic tip recommended)
■
Flat blade screwdriver
■
Stylus or pencil (to press the Clear CMOS button)
■

Obtaining the Chassis Serial Number

Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
To obtain support for Oracle Database Appliance Version 1, you need to report your product
serial number. The product serial number is located on an RFID tag on the front of the system
and on the Customer Information Sheet that is included with the system.
108 Oracle Database Appliance Service Manual • June 2017
Information in this appendix does NOT apply to Oracle Database Appliance X3-
Information in this appendix does NOT apply to Oracle Database Appliance X3-