Oracle Database Appliance X6-2-HA Manual page 121
Hide thumbs
Also See for Database Appliance X6-2-HA:
- Owner's manual (116 pages) ,
- Service manual (300 pages) ,
- Deployment and user's manual (473 pages)
Table of Contents
Advertisement
b.
Grasp the latch and open it to a 45 degree angle [2].
c.
Using the latch, slowly pull the drive straight out of the drive slot, not
sideways or vertically.
Do not use much force on the latch when removing the drive.
Equipment damage. Do not use the latch as an ejector. Do not bend it too far to the
Caution -
right.
Equipment damage. Always replace a drive with another drive to maintain proper
Caution -
airflow.
Install Storage Drive
Information in this appendix does NOT apply to Oracle Database Appliance X3-
Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section describes installing a storage drive in Oracle Database Appliance Version 1.
1.
Determine the drive slot location for the replacement drive.
Drives are physically addressed according to the slot in which they are installed. See
and Boot Drive Locations" on page 118
for drive locations.
Appendix A • Servicing the Oracle Database Appliance Version 1
Install Storage Drive
"Storage
121
Advertisement
Table of Contents
