Oracle Database Appliance X6-2-HA Manual page 110

Shut Down a Server Node
Emergency shutdown: Press and hold the recessed Power button on the lower left-hand
■
corner of the server node's front panel for at least five seconds until the main power is off
and the server node enters standby power mode (see the following figure [1]).
Caution -
shutdown unless it is an emergency.
When the server node is shut down, the Power/OK LED [2] on the server node's front panel
flashes, indicating that the server node is in standby power mode.
2. To shut down a server node using the Oracle ILOM, perform one of the following:
Using the Oracle ILOM web interface:
■
a.
b.
c.
110 Oracle Database Appliance Service Manual • June 2017
Data loss. To avoid data loss and file system corruption, always use a graceful
Open a browser and enter the server node's service processor IP
address in the browser's address field.
At the log in page, type a user name (the account must have Reset and
Host Control (r) privileges) and password, and click the Log In button.
Go to Remote Power Control and do one of the following: