Servicing Power Supplies (Cru) - Oracle Database Appliance X6-2-HA Manual

Install a Fan Module
2. Apply firm pressure to fully seat the fan module.
The fan release lever engages when the fan is fully seated.
3. Verify that the Fan Fault Status LED on the replacement fan module is lit green.
Verify that the following fault LEDs on the applicable server node are off.
4.
■ Front and rear Service Required LEDs located on the applicable server node
REAR HDD/PS/FAN LED located on the front of the applicable server node
■
See "Server Node Status Indicators" on page 37

Servicing Power Supplies (CRU)

Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
128 Oracle Database Appliance Service Manual • June 2017
Information in this appendix does NOT apply to Oracle Database Appliance X3-
for more information about system LEDs.