Oracle Database Appliance X6-2-HA Manual page 215

Each Oracle Database Appliance Version 1 power-on-self-test (POST) diagnostic is a low-
level test designed to detect faults in a specific hardware component. If the POST diagnostic
discloses an F1 or F2 error, it typically reports the following information about the error:
Type of error detected
■
When or where the error occurred
■
The following table lists some of the F1 and F2 error messages that could appear during the
POST diagnostics along with instructions for how to possibly resolve the error reported.
BIOS POST Error Message
Uncorrectable Error Detected on Last Boot:IOH
(0) Protocol Error (Please Check SP Log for more
Details)
Uncorrectable Error Detected on Last Boot:IOH(0)
QPI [x] Error (Please Check SP Log for more Details)
Uncorrectable Error Detected on Last Boot:IOH
(0) PCI-E [x] Error (Please Check SP Log for more
Details)
Uncorrectable Error Detected on Last Boot:IOH(0)
ESI Error (Please Check SP Log for more Details)
Uncorrectable Error Detected on Last Boot:IOH
(0) Thermal Error (Please Check SP Log for more
Details)
Uncorrectable Error Detected on Last Boot:IOH(0)
DMA Error (Please Check SP Log for more Details)
Uncorrectable Error Detected on Last Boot:IOH(0)
Miscellaneous Error (Please Check SP Log for more
Details)
Uncorrectable Error Detected on Last Boot:IOH(0)
VTd Error (Please Check SP Log for more Details)
BMC Not Responding
■ Primary Slave Hard Disk Error
■ Primary Master Hard Disk Error
Error Type Resolution
IOH error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
Note -
QPI Link 1.
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
Note -
1 to 10 depending on the PCI root port on IOH.
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
IOH error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
IOH error ■ Press F1 to continue.
■ Check the fault management function and the SP
IOH error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
Oracle ILOM error ■ Press F1 to continue.
Note -
the SP/BIOS communication an internal error occurs.
This error might require you to restart the SP.
IDE/ATAPI error ■ Press F1 to continue.
■ Check the SP event log in Oracle ILOM for more
Appendix A • Servicing the Oracle Database Appliance Version 1
Server Node Basic Input/Output System (BIOS)
details.
event log in Oracle ILOM for more details.
Where QPI [x] equals 0 for QPI Link 0 or 1 for
event log in Oracle ILOM for more details.
Where PCI-E [x] port number can range from
event log in Oracle ILOM for more details.
event log in Oracle ILOM for more details.
details.
event log in Oracle ILOM for more details.
details.
This error message might display if during
details.
215