Related Information; Required Tools; Preparing The Server For Component Replacement - Oracle Exadata X5-2 Service Manual

Required Tools

Motherboard (MB), designated as a backup quorum member.
■
Power supply (PS), designated as a backup quorum member.
■
When a server FRU that contains the KIP is removed and a replacement component is installed,
the KIP of the replacement component is programmed by Oracle ILOM to contain the same
KIP as the other two components.
Note -
be completed when two of the three quorum members contain matching key identity properties.

Related Information

"Servicing Power Supplies" on page 71
■
"Servicing the Storage Drive Backplanes" on page 112
■
"Servicing the Motherboard Assembly" on page 145
■
Required Tools
The server can be serviced with the following tools:
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
Related Information
"Preparing for Service" on page 47
■
"Servicing Components That Do Not Require Server Power-Off" on page 61
■
"Servicing Components That Require Server Power-Off" on page 77
■

Preparing the Server for Component Replacement

Note -
are necessary. See the replacement procedures for those components for more information.
50 Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018
Only one of the quorum members can be replaced at a time. Automated updates can only
When you are replacing the storage drives or power supplies, not all of these procedures