Table of Contents
Advertisement
Required Tools
Power supply (PS), designated as a backup quorum member.
■
When a server FRU that contains the KIP is removed and a replacement component is installed,
the KIP of the replacement component is programmed by Oracle ILOM to contain the same
KIP as the other two components.
Note -
be completed when two of the three quorum members contain matching key identity properties.
Related Information
"Servicing Power Supplies (CRU)" on page 87
■
"Servicing the Disk Backplane (FRU)" on page 151
■
"Servicing the Motherboard (FRU)" on page 199
■
Required Tools
The server can be serviced with the following tools:
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
Torx (6 lobe) T10, T15, T25, and T30 screwdrivers
■
12.0 in-lbs/ft (inch-pounds/foot) torque driver
■
Related Information
"Preparing for Service" on page 49
■
Preparing the Server for Component Replacement
Before you can remove and install components that are inside the server, you must perform the
procedures in some or all of the following tasks:
52
Oracle Server X7-2 Service Manual • October 2017
Only one of the quorum members can be replaced at a time. Automated updates can only
Advertisement
Chapters
Table of Contents
Troubleshooting
