Power Off The System; Performing Electrostatic Discharge And Antistatic Prevention Measures - Oracle Database Appliance X6-2-HA Manual

Power Off the System

Power Off the System
Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
The appliance database must be shut down before powering off the system chassis.
1. Shut down both server nodes.
Shutting down both server nodes places the system in standby power mode.
See "Shut Down a Server Node" on page
2. Disconnect the AC power cords from the system.
Disconnecting the power cords from the system removes all power from the system.
Performing Electrostatic Discharge and Antistatic
Prevention Measures
Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
Electrostatic discharge (ESD) sensitive devices, such as the motherboards, PCIe cards, storage
drives, and memory cards, require special handling.
Caution -
along their connector edges.
When handling components such as storage drive assemblies, circuit boards, or PCIe cards:
Attach an antistatic strap to your wrist and then to a metal area on the chassis. Following
■
this practice equalizes the electrical potential between you and the system.
Note -
antistatic wrist straps are included with some options and components.
112 Oracle Database Appliance Service Manual • June 2017
Information in this appendix does NOT apply to Oracle Database Appliance X3-
Information in this appendix does NOT apply to Oracle Database Appliance X3-
Equipment damage. Follow antistatic precautions and do not touch the components
An antistatic wrist strap is not included in the system Accessory Kit. However,
109.