Sflow Counter Collector; Sflow Counter Interval - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

<Sysname> system-view
[Sysname] sflow collector 2 ip 3.3.3.1 description netserver time-out 1200 datagram-size
1000

sflow counter collector

Use sflow counter collector to specify an sFlow collector for counter sampling.
Use undo sflow counter collector to restore the default.
Syntax
sflow counter collector collector-id
undo sflow counter collector
Default
No sFlow collector is specified for counter sampling.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
collector-id: Specifies an sFlow collector by its ID. The value range for this argument is 1 to 10.
Examples
# Specify sFlow collector 2 on GigabitEthernet 1/0/1 for counter sampling.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] sflow counter collector 2

sflow counter interval

Use sflow counter interval to enable counter sampling and set a counter sampling interval.
Use undo sflow counter interval to disable counter sampling.
Syntax
sflow counter interval interval
undo sflow counter interval
Default
Counter sampling is disabled.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
interval: Specifies the counter sampling interval in the range of 2 to 86400 seconds.
322