Setting User Group Password Control Parameters - HPE FlexNetwork 5510 HI Series Security Configuration Manual

Step
each user.
8. Specify
number of login attempts and
the action to be taken when a
user fails to log in after the
specified
attempts.
9. Set the number of days
during
notified
password expiration.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
11. Set the maximum account
idle time.

Setting user group password control parameters

Step
1. Enter system view.
2. Create a user group and
enter user group view.
3. Configure
expiration time for the user
group.
4. Configure
password length for the user
group.
5. Configure
composition policy for the
user group.
6. Configure
complexity checking policy
for the user group.
7. Specify
number of login attempts and
the action to be taken when a
user in the user group fails to
log in after the specified
number of attempts.
Command
the maximum
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
number of
which a user is
password-control
of the pending
alert-before-expire alert-time
password-control
expired-user-login delay delay
times times
password-control
idle-time idle-time
Command
system-view
user-group group-name
the password
password-control
aging-time
the minimum
password-control length length
the password
password-control composition
type-number
[ type-length type-length ]
the password
password-control
{ same-character | user-name }
check
the maximum
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
login
aging
type-number
complexity
211
Remarks
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for
1 minute before trying again.
The default setting is 7 days.
By default, a user can log in three
times within 30 days after the
password expires.
The default setting is 90 days.
Remarks
N/A
By default, no user group exists.
For information about how to
configure a user group, see
"Configuring AAA."
By default, the
expiration time of the user group
equals the global
expiration time.
By default, the
password length of the user group
equals the global
password length.
By default, the
composition policy of the user
group equals the global password
composition policy.
By default, the
complexity checking policy of the
user group equals the global
password complexity checking
policy.
By default, the login-attempt
policy of the user group equals the
global login-attempt policy.
password
password
minimum
minimum
password
password