Front Door Assembly Components
4
(a)
a
(b)
b
(b)
5
4
(a)
b
(b)
a
(b)
1. Door panel
2. Door hinge
: Apply lithium grease 99000-25011 to rotating part.
: Apply sealant 99000-31110 to contact face.
3. Door open stopper
4. Front door hinge bolt (body side)
Front Door Assembly Removal and Installation
Removal
1) Remove front fender referring to "Front Fender
Removal and Installation".
2) Disconnect door harness lead wires at each coupler.
3) Remove door open stopper (1).
2
3
(c)
2
S6RW0D9A06006
I4RS0A9A0005-01
1
5. Door open stopper bolt
6. Front door opening weather-strip
: 27 N⋅m (2.7 kgf-m, 19.5 lb-ft)
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
4) Support door panel (1) using a jack (2) with rags (3)
and a piece of wood (4) placed between jack (2) and
panel (1) as shown.
Hood / Fenders / Doors:
S6RW0D9A06005
6
I6RW0B9A0002-01
: 21 N⋅m (2.1 kgf-m, 15.5 lb-ft)
a, b: Front door hinge bolt (door side)
Loosen and tightening order: a→b
I2RH019A0003-01
9J-3