802.1X With Acl Assignment Configuration Example - HP 1910 User Manual

Figure 339 Configuring the AAA accounting method for the ISP domain
9. After the configuration process is complete, click Close.

802.1X with ACL assignment configuration example

Network requirements
As shown in
server at 10.1.1.1 as the authentication and authorization server and the RADIUS server at 10.1.1.2 as the
accounting server. Assign an ACL to GigabitEthernet 1/0/1 to deny the access of 802.1X users to the
FTP server at 10.0.0.1/24.
Figure 340 Network diagram
Host
192.168.1.10
Configuring IP addresses
# Assign an IP address to each interface as shown in
Configuring a RADIUS scheme
1. From the navigation tree, select Authentication > RADIUS.
The RADIUS server configuration page appears.
2. Configure the RADIUS primary authentication server:
a. Select the server type Authentication Server.
Figure 340, perform 802.1X authentication on port GigabitEthernet 1/0/1. Use the RADIUS
Vlan-int2
192.168.1.1/24
GE1/0/1
Switch
Authentication servers
(RADIUS server cluster)
10.1.1.1
10.1.1.2
Internet
FTP server
Figure 340. (Details not shown.)
369
10.0.0.1