Select Audio Jingle For Good Read Event - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode

Select Audio Jingle for Good Read Event

This parameter selects which preloaded Jingle to use in indicating a good read
event.
After uploading up to fifteen (15) Jingles to the scanner using the Datalogic
Aladdin
(1-15) will be sounded when the scanner performs a good read.
$CAUGR
Select Audio Jingle on Good Read
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
DEFAULT
NOTE
84
"Audio Jingle Enable" on page 82 must be selected for this configuration
item to take effect.
NOTE
™
configuration utility, use this setting to designate which of the Jingles
The capability to download Audio jingle require Datalogic Aladdin™ configu-
ration software, for this reason it is possible only if the reader is used with
the base station.
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by two digits
from the Alphanumeric characters in
Keypad
representing the desired Jingle #. End by scan-
ning the ENTER/EXIT bar code again.
00 = Use built-in Good Read Jingle (Shutter.wav)
Audio Jingles
Appendix D,
~
CANCEL
RIDA™ DBT6400