Datalogic RIDA DBT6400 Product Reference Manual page 18

Setup
NOTE
Bluetooth Unpairing
To unpair the reader and the Host, press and hold the Link button until the blue
LED turns off.
Alternatively, read the following unlink label.
NOTE
Bluetooth Passkey Request
During the pairing process, based on Host and Reader security settings, you
may need to enter a passkey.
If you let the Host generate the passkey, simply enter the required code by
scanning the corresponding bar codes for alphanumeric entry. Complete by
scanning the End label. To restart the entering of the passkey, read the Restart
label.
If, alternatively, you choose to enter on the Host the passkey proposed by the
Reader, enter 1234.
HID Country Mode
When the Reader is connected with a Bluetooth Application in HID mode, you
may want to set the country for which your Host is localized. Go to " HID Coun-
try Mode" on page 266" and read one of the configuration command labels.
10
The DBT6400 reader can be set up to require a PIN code when connecting. If you
want to set up a PIN, or add new equipment to a system that uses a custom
security PIN, please see " BT Security Features" on page 262.
Before pairing to another Host, the reader must be unpaired from the previous.
\x0d
\x7f
Unlink
Passkey END
Passkey Restart
RIDA™ DBT6400