Codabar Set Length 1 - Datalogic RIDA DBT6400 Product Reference Manual

Enter/Exit Programming Mode

Codabar Set Length 1

This feature specifies one of the bar code lengths for
on page
page 157
Length includes the bar code's start, stop, check and data characters. The
length must include at least one data character.
The length can be set from 3 to 50 characters. See
for more detailed programming instructions.
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
158
157. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CCBL1
03 = Length 1 is 3 Characters
DEFAULT
Codabar Length Control
Fixed Length on page 157
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
Codabar
Variable Length on
Mode.
on page 248
Appendix D, Key-
~
RIDA™ DBT6400